BV-GD automatic steel BVE-GD automatic stainless steel

with opening aid - odor-proof - not completely waterproof

Load capacity:

125 kN test load EN 124.

Material:

Frame and cover made of 2 mm cold-formed precision steel profiles, hot-dip galvanised. Or in grade 304 stainless steel, passivated. Stainless steel hinges. High-specification gas strut(s).

Features:

Comfort-lift access cover. Smell proof, largely water-tight (not guaranteed to be completely water-tight). EPDM seal. Opening tools included. Opening is assisted by the gas strut(s) to such an extent that the BV-GD/BVE-GD cover can be opened and closed by one person. Safety device fitted to prevent the open cover from closing.

Applications:

As a cover over installations that need to be opened frequently, without particular effort. Particularly for inspection chambers. BVE-GD is particularly recommended over plant in swimming pool areas For indoor swimming pools only use grade 316 material!

 

NOTE FOR SWIMMING POOL AREAS:

Do not use an access cover made of galvanised steel in the swimming pool area! 
Only use stainless steel grade 304 or grade 316 (for indoor swimming pools)  

Installation:

Please study the enclosed installation instructions carefully before installation and pay attention to our specifications. Care must be taken to seal the outer frame into the surrounding flooring.
Important note: The gas strut(s) are not installed for transport-related reasons. These should be installed after the cover and frame have been installed and filled (concrete must be set), in the open position in accordance with our installation instructions.

Types & dimensions

GALVANISED STEEL

Type

Clear dimensions of shaft (≈ cm)Outside dimensions without anchor (≈ cm)Weight empty approxS/O*

cxdAxB

BV-GD 66

60 x 6073,5 x 75,1527 kgS

BV-GD 86

80 x 6093,5 x 75,1533 kgS

BV-GD 88

80 x 8093,5 x 95,1537 kgS

BV-GD 106

100 x 60113,5 x 75,1538 kgS

BV-GD 110

100 x 100113,5 x115,1550 kgS

Number of gas struts

Size

Number

60x60

1 piece

80x60

2 piece

80x80

2 piece

100x60

2 piece

100x100

2 piece

Stainless steel grade 304, passivated

Type

Clear dimensions of shaft (≈ cm)Outside dimensions without anchor (≈ cm)Weight empty approx.S/O*

c x d A x B

BVE-GD 66

60 x 6073,5 x 75,1528kgS

BVE-GD 86

80 x 6093,5 x 75,1535kgS

BVE-GD 88

80 x 8093,5 x 95,1541kgS

BVE-GD 106

100 x 60113,5 x 75,1536kgS

BVE-GD 110

100 x 100113,5 x 115,1548kgS

Cover depth ≈ 5.0 cm
Installation height ≈ 7.5 cm
Special sizes possible
*S = available from stock
*O = to order

Section drawing

  • 1 / Frame
  • 2 / Cover
  • 3 / Seal
  • 4 / Reinforcement
  • 5 / Allen Screw
  • 6 / Plastic cap
  • 7 / Anchor
  • 8 / Hinge
  • 9 / Gas strut
  • 10 / Safety device

Specification clause

HAGODECK Type BV-GD automatic (galvanised steel)
Access cover with Golden Key Lift Off opening tool, Type HAGODECK BVGD automatic, clear opening ....... x ....... cm, suitable for infilling with the architect’s choice of floor finish. With flush-to-floor hinge and gas strut(s) for assisted opening, hot-dip galvanised steel, largely sealed, 125 kN (EN 124), unobtrusive corner joints (max. visible surface 35 x 35 mm). Installation shall be according to the manufacturer’s instructions.
Manufacturer: HAGO A-4600 Wels, Austria www.hago.at

HAGODECK Type BVE-GD (stainless steel)
Access cover with Golden Key Lift Off opening tool, Type HAGODECK BVE-GD automatic, clear opening ....... x ....... cm, suitable for infilling with the architect’s choice of floor finish. With flush-to-floor hinge and gas strut(s) for assisted opening, grade 304 stainless steel, largely sealed, 125 kN (EN 124), unobtrusive corner joints (max. visible surface 35 x 35 mm). Installation shall be according to the manufacturer’s instructions.
Manufacturer: HAGO A-4600 Wels, Austria www.hago.at