BV-GD-F90 steel, BVE-GD-F90 stainless steel

Fire-resistant, with an opening aid, odor-proof

Load capacity:

125 kN test load EN 124

Material:

Frame and cover made of 2 mm cold- formed precision steel profiles, hot-dip galvanised. Or in grade 304 stainless steel, passivated. High- specification gas strut(s). Fire protection panel, EPDM seal and fire-resistant seal.

Features:

Comfort-lift access cover. Smell proof. Opening tools included. Opening is assisted by the gas strut(s) to such an extent that the BV-GD-F90/ BVE-GD-F90 cover can be opened and closed by one person. Safety device (hold open arm) fitted to prevent the open cover from closing.

Fire test certificate:

The Austrian test certificate issued by the Institute for Fire Protection Technology and Safety Research (IBS)
confirms that HAGODECK Type BV-F90 steel galv. and BVE-GD-F90 stainless steel resists a fire for 120 minutes and thus
significantly contributes to safety in the event
of a fire.

In accordance with EN 13501-2, Type BV-GD-F90 and BVE-GD-F90 is classified in fire resistance class REI 120 (a↔b).

Applications:

Access covers inside buildings that are required to be fire-resistant and that need to be opened frequently, without particular effort.

Installation:

Please study the enclosed installation instructions carefully before installation and pay attention to our specifications. Care must be taken to seal the outer frame into the surrounding flooring.

Important note:

The gas strut(s) are not installed for transport-related reasons. These should be installed after the cover and frame have been installed and filled (concrete must be set), in the open position in accordance with our installation instructions.

Types & Dimensions

Steel

Type

Clear S/O* dimensions of shaft (≈ cm)Outside dimensions (≈ cm)Weight approx.S/O*

c x dA x B

BV-GD-F90 66

60 x 6073,5 x 75,1534 kgS

BV-GD-F90 86

80 x 6093,5 x 75,1542 kgS

BV-GD-F90 88

80 x 8093,5 x 95,1550 kgS

BV-GD-F90 106

100 x 60113,5 x 75,1549 kgO

BV-GD-F90 110

100 x 100113,5 x115,1566 kgS

Stainless steel

Type

Clear S/O* dimensions of shaft (≈ cm)Outside dimensions (≈ cm)Weight approx.S/O*

c x dA x B

BVE-GD-F90 66

60 x 6073,5 x 75,1534 kgO

BVE-GD-F90 86

80 x 6093,5 x 75,1542 kgO

BVE-GD-F90 88

80 x 8093,5 x 95,1550 kgO

BVE-GD-F90 106

100 x 60113,5 x 75,1549 kgO

BVE-GD-F90 110

100 x 100113,5 x115,1566 kgO

Cover depth ≈ 5.0 cm
Installation depth: ≈ 7.5 cm
Total height = 21.7 cm
Special sizes possible
*S = article available from stock
*O = article is manufactured on request 

Section drawing

  • 1 / Frame
  • 2 / Cover
  • 3 / Seal
  • 4 / Reinforcement
  • 5 / Allen screw
  • 6 / Plastic cap
  • 7 / Anchor
  • 8 / Hinge
  • 9 / Gas strut
  • 10 / Safety device
  • 11 / Fire protection plate
  • 12 / Stainless steel Z-bracket
  • 13 / Lifting handle for fire protection plate

Specification clause

HAGODECK Type BV-GD-F90 (galvanised steel)
Access cover with Golden Key Lift Off opening tool, Type HAGODECK BV-GD-F90, clear opening ....... x ....... cm, suitable for infilling with the architect’s choice of floor finish. Fire-resistant version classified in accordance with EN 13502-2: REI 120 (a↔b) (with classification report), with flush-to-floor hinge and gas strut(s) for assisted opening, hot dip galvanised steel, smell proof, 125 kN (EN 124), unobtrusive corner joints (max. visible surface 35 x 35 mm). Installation shall be according to the manufacturer’s instructions.
Manufacturer: HAGO A-4600 Wels, Austria www.hago.at

HAGODECK Type BVE-GD-F90  (stainless steel)
Access cover with Golden Key Lift Off opening tool, Type HAGODECK BVE-GD-F90, clear opening ....... x ....... cm, suitable for infilling with the architect’s choice of floor finish. Fire-resistant version classified in accordance with EN 13502-2: REI 120 (a↔b)  (with classification report), with flush-to-floor hinge and gas strut(s) for assisted opening, stainless steel, smell proof, 125 kN (EN 124), unobtrusive corner joints (max. visible surface 35 x 35 mm). Installation shall be according to the manufacturer’s instructions.
Manufacturer: HAGO A-4600 Wels, Austria  www.hago.at