BV-RA steel galvanised BVE-RA stainless steel

largely odor- and water-resistant

Load capacity:

125 kN test load EN 124 when completely filled with concrete C35/45 (EN 206-1).

Material:

In Type BV-RA frame, cover and cross-beam in 2 mm cold-formed precision steel profiles. Hot-dip galvanised. In Type BVE-RA frame, cover and cross-beam made of grade 304 stainless steel (on request also available in grade 316 stainless steel). EPDM seal.

Features:

Smell proof, largely water-tight multi-part cover (Not guaranteed to be completely water-tight). The cross-beams can be removed without tools, to give clear access to the entire duct. This gives clear access to the duct when retrofitting pipes or during repair work.

Versions:

In addition to the standard cover height (approx.50 mm), a deep cover version (approx. 100 mm) is available. Ideal for infill with paviors.

The Lift-Off opening system:

Every HAGODECK Type BV(E)-RA cover comes with a set of lifting keys and precise installation instructions. The HAGO advantage: jammed covers are released by simply turning the Golden Key.

Applications:

Ideal cover for supply and disposal ducts in the industrial and workshop sector, e.g. for energy, water and compressed air supply.

Installation:

Installation must be carried out according to our instructions. With water-tight models, care must be taken to seal the outer frame into the surrounding flooring.

Section drawing

  • 1 / Frame
  • 2 / Cover
  • 3 / Seal
  • 4 / Reinforcement
  • 5 / Allen screw
  • 6 / Plastic cap
  • 7 / Anchor
  • 8 / Cross-beam
  • 9 / Seal for cross-beam
  • 10 / Location pin

Specification clause

HAGODECK Type BV-RA (galvanised steel)
HAGODECK Type BVE-RA (stainless steel)
Access cover with Golden Key Lift Off opening tool, Type HAGODECK BVRA/BVE-RA, clear opening ....... x ....... cm, suitable for infilling with the architect’s choice of floor finish. Multiple covers with removable cross-beam (without tools); BV-RA: galvanised steel, BVE-RA: Grade 304 stainless steel, largely sealed, 125 kN (EN 124), unobtrusive corner joints (max. visible surface 30 x 30 mm). Installation shall be according to the manufacturer’s instructions.
Manufacturer: HAGO A-4600 Wels, Austria www.hago.at