BV-Thermo steel galvanised BVE-Thermo stainless steel

odor- and waterproof

Load capacity:

125 kN test load EN 124.

Material:

Frame and cover in 2 mm cold-formed precision steel profiles. Hot-dip galvanised. Insulated version, consisting of: Z-brackets, EPDM seal, polyurethane rigid foam insulation panel coated with aluminium on both sides. Thermal resistance = 3.6 m2 K/W Thermal coefficient 0.276 W/m2 K (=RC Warde)

Features:

Sealed cover with inlaid insulation panel. Tapered design allows easy opening. Virtually invisible when installed. Robust steel mesh reinforcement.

The Lift-Off opening system:

Every HAGODECK Type BV thermo cover comes with a set of lifting keys and precise installation instructions. The HAGO advantage: jammed covers are released by simply turning the Golden Key.

Applications:

For areas inside buildings where a cover with insulation properties is required.

Installation:

Installation must be carried out according to our instructions. With water-tight models, care must be taken to seal the outer frame into the surrounding flooring.

Types & dimensions

Type

Clear dimensions of shaft (≈ cm)Outside dimensions (≈ cm)Weight empty approx.S/O*

c x d A x B

BV-Thermo 55

50 x 5063,5 x 63,519 kgS

BV-Thermo 66

60 x 6073,5 x 73,523 kgS

BV-Thermo 86

80 x 6093,5 x 73,529 kgS

BV-Thermo 88

80 x 8093,5 x 93,533 kgS

BV-Thermo 106

100 x 60113,5 x 73,533 kgS

BV-Thermo 110

100 x 100113,5 x 113,545 kgS

Cover depth ≈ 5.0 cm
Installation height ≈ 7.5 cm
Insulation panel penetrates ≈ 6.3 cm into the shaft.
Special sizes possible
*S = available from stock
*O = to order

Section drawing

  • 1 / Frame
  • 2 / Cover
  • 3 / Seal
  • 4 / Reinforcement
  • 5 / Allen screw
  • 6 / Plastic cap
  • 7 / Anchor
  • 8 / Insulation plate in Z-bracket
  • 9 / Lifting handle for insulation plate
  • 10 / Alu Z-bracket

Specification clause

HAGODECK Type BV thermo (galvanised steel)
Access cover with Golden Key Lift Off opening tool, Type HAGODECK BV thermo, clear opening ....... x ....... cm, suitable for infilling with the architect’s choice of floor finish. Insulated version with insulation panel [min. 0.3 W/m2 K (=RC Warde)], hot-dip galvanised steel, sealed, 125 kN (EN 124), unobtrusive corner joints (max. visible surface 35 x 35 mm). Installation shall be according to the manufacturer’s instructions.
Manufacturer: HAGO A-4600 Wels, Austria www.hago.at