BVA Aluminium

Sealed cover

LOAD CAPACITY:

125 kN test load EN 124.

MATERIAL:

Frame and cover sections in extruded aluminium. Stainless steel screws.

FEATURES:

Sealed access cover in high-quality finish. Very attractive surface, the visible edges are particularly attractive. Therefore these covers are particularly suitable where a look of elegance is required. Very easy-to-open design. Robust corner joints guarantee a very high degree of rigidity and make it easier to lay tiles and ceramic finishes. EPDM seal. The cover is reinforced with a clamped steel mesh reinforcement.

THE LIFT-OFF OPENING SYSTEM:

Every HAGODECK Type BVA alu cover comes with a set of lifting keys and precise installation instructions. The HAGO advantage: jammed covers are released by simply turning the Golden Key.

APPLICATIONS:

Inside buildings where it is important to obtain a nice visual effect. Also, in places where floor finishes may need polishing after fixing or where particular attention needs to be given to corrosion resistance.

INSTALLATION:

Installation must be carried out according to our instructions. With water-tight models, care must be taken to seal the outer frame into the surrounding flooring and to fill the cover with water-tight concrete.

types & dimensions

Type

Clear S/O* dimensions of shaft (≈ cm)Outside dimensions (≈ cm)Weight approx.S/O*

c x dA x B

BVA 22

20 x 2032 x 323 kgS

BVA 33

30 x 3042 x 425 kgS

BVA 44

40 x 4052 x 527 kgS

BVA 45

45 x 4557 x 578 kgS

BVA 55

50 x 5062 x 629 kgS

BVA 64

60 x 4072 x 529 kgS

BVA 66

60 x 6072 x 7210 kgS

BVA 635

63,5 x 63,575,5 x 75,511 kgS

BVA 77

70 x 70 82 x 8212 kgS

BVA 86

80 x 6092 x 7212 kgS

BVA 88

80 x 8092 x 9215 kgS

BVA 106

100 x 60112 x 7215 kgS

BVA 108

100 x 80112 x 9221 kgS

BVA 110

100 x 100112 x 11223 kgS

Cover depth ≈ 6.6 cm
Installation height ≈ 7.6 cm
Special sizes possible
*S = available from stock
*O = to order

Section drawing

  • 1 / Frame
  • 2 / Cover
  • 3 / Seal
  • 4 / Reinforcement
  • 5 / Allen screw
  • 6 / Plastic cap
  • 7 / Base plate
  • 8 / Injection-moulded part (plastic)
  • 9 / Square boss

Specification clause

HAGODECK Type BVA (aluminium) Access cover with Golden Key Lift Off opening tool, Type HAGODECK BVA, clear opening ....... x ....... cm, suitable for infilling with the architect’s choice of floor finish. Aluminium, sealed, 125 kN (EN 124), unobtrusive corner joints (max. visible surface 30 x 30 mm). Stainless steel screws.
Installation shall be according to the manufacturer’s instructions. Manufacturer: HAGO A-4600 Wels, Austria www.hago.at