BVA-SL slim Aluminium

Only 50 mm installation height, odor-proof and waterproof

Load capacity:

15 kN test load EN 124.

Material:

Frame and cover sections in extruded aluminium. Stainless steel screws.

Features:

Odour and waterproof access cover in high-quality finish. Only 5 cm installation depth. Particularly suitable for situations where greater installation depths are not possible. The shallow trough results in a weight reduction when filled - so less effort is required to lift the cover. An unrestricted height of 14 mm is available for laying slabs, tiles or parquet flooring etc. Two chemical-resistant special seals. The cover is reinforced with a clamped steel mesh reinforcement.

The Lift-Off opening system:


Every HAGODECK Type BVA-SL slim Alu comes with a set of lifting keys and precise installation instructions. The HAGO advantage: Jammed covers are lifted by simply turning in the golden lifting key.

Recommended applications:

For indoor access shafts, for which a pleasant appearance is required. Also, in places where floor finishes may require grinding or where particular attention must be paid to corrosion resistance.

Installation:

Installation must be carried out according to our instructions. With water-tight models, care must be taken to seal the outer frame into the surrounding flooring and to fill the cover with water-tight concrete. When laying the tiles/slabs at a later stage, ensure that they are fully bonded over the entire surface in the area around the sleeves (no air pockets).

Types & Dimensions

Type

Clear dimen. of shaft (≈ cm)Outside dimensions (≈ cm)Weight empty approx.S/O*

c x d A x B

BVA-SL slim 22

20 x 2029 x 292 kgS

BVA-SL slim 33

30 x 3039 x 393 kgS

BVA-SL slim 44

40 x 4049 x 494 kgS

BVA-SL slim 45

45 x 4554 x 545 kgS

BVA-SL slim 55

50 x 5059 x 596 kgS

BVA-SL slim 64

60 x 4069 x 496 kgS

BVA-SL slim 66

60 x 6069 x 697 kgS

BVA-SL slim 635

63,5 x 63,572,5 x 72,58 kgS

BVA-SL slim 77

70 x 7079 x 799 kgS

BVA-SL slim 86

80 x 6089 x 699 kgS

BVA-SL slim 88

80 x 8089 x 8910 kgS

BVA-SL slim 106

100 x 60109 x 6910 kgS

BVA-SL slim 108

100 x 80109 x 8912 kgS

BVA-SL slim110

100 x 100109 x 10914 kgS

Cover depth 39 mm / 14 mm (around the edge)
Installation height ≈ 5.0 cm
Special sizes possible
*S = available from stock 
*O = to order

Section Drawing

  • 1 / Frame
  • 2 / Cover
  • 3 / Top seal
  • 4 / Bottom seal
  • 5 / Allen screw (stainless steel)
  • 6 / Plastic cap
  • 7 / Cover plate (aluminium)
  • 8 / Reinforcement
  • 9 / Nut (stainless steel)
  • 10 / Casting (aluminium)