BVA thermo Aluminium

Odor-proof and waterproof, with thermal insulation

LOAD CAPACITY:

125 kN test load EN 124.

MATERIAL:

Frame and cover sections in extruded aluminium. Stainless steel screws. Insulated version, consisting of: Z-brackets, EPDM seal, polyurethane rigid foam insulation panel coated with aluminium on both sides. 
Thermal resistance = 3.60 m2 K/W, 
Thermal coefficient 0.27 W/m2K 

FEATURES:

Sealed access cover in high-quality finish with inlaid insulation panel. Very attractive surface, the visible edges are particularly attractive. Therefore these covers are particularly suitable where a look of elegance is required. Very easy- to-open design. Robust corner joints guarantee a very high degree of rigidity and make it easier to lay tiles and ceramic finishes. EPDM seal. The cover is reinforced with a clamped steel mesh reinforcement. 

THE LIFT-OFF OPENING SYSTEM:

Every HAGODECK Type BVA thermo alu cover comes with a set of lifting keys and clear installation instructions.
The HAGO advantage: jammed covers are released by simply turning the Golden Key. 

APPLICATIONS:

Inside buildings where it is important to obtain a nice visual effect and where a cover with insulation properties is required. Also, in places where floor finishes may need polishing after fixing or where particular attention needs to be given to corrosion resistance. 

INSTALLATION:

Installation must be carried out according to our instructions. With water-tight models, care must be taken to seal the outer frame into the surrounding flooring and to fill the cover with water-tight concrete.

types & dimensions

Type

Clear S/O* dimensions of shaft (≈ cm)Outside dimensions (≈ cm)Weight approx.S/O*

c x dA x B

BVA thermo 22

20 x 2032 x 323 kgO

BVA thermo 33

30 x 3042 x 425 kgO

BVA thermo 44

40 x 4052 x 528 kgO

BVA thermo 45

45 x 4557 x 579 kgS

BVA thermo 55

50 x 5062 x 6210 kgS

BVA thermo 64

60 x 4072 x 5210 kgS

BVA thermo 66

60 x 6072 x 7212 kgS

BVA thermo 635

63,5 x 63,575,5 x 75,512 kgO

BVA thermo 77

70 x 70 82 x 8214 kgO

BVA thermo 86

80 x 6092 x 7214 kgS

BVA thermo 88

80 x 8092 x 9217 kgS

BVA thermo 106

100 x 60112 x 7217 kgS

BVA thermo 108

100 x 80112 x 9221 kgS

BVA thermo 110

100 x 100112 x 11226 kgS

Installation depth: ≈ 6.6 cm
Installation height ≈ 7.6 cm
Insulation panel penetrates ≈ 7.9 cm into the shaft
Special sizes possible
*S = article available from stock
*O = to order 

Section drawing

  • 1 / Frame
  • 2 / Cover
  • 3 / Seal
  • 4 / Reinfocement
  • 5 / Allen screw (stainless steel)
  • 6 / Die-cast corner (alu)
  • 7 / Plastic cap
  • 8 / Base plate
  • 9 / Injection-moulded part (plastic)
  • 10 / Square nut (stainless steel)
  • 11 / Insulation plate in Z-bracket
  • 12 / Lifting handle for insulation plate
  • 13 / Alu Z-bracket

Specification clause

HAGODECK Type BVA thermo (aluminium)
Access cover with Golden Key Lift Off opening tool, Type HAGODECK BVA thermo , clear opening ....... x ....... cm, suitable for infilling with the architect’s choice of floor finish. Aluminium, Insulated version with insulation panel , thermal resistance min. 3,60 m² K/W, sealed, 125 kN (EN 124), unobtrusive corner joints (max. visible surface 30 x 30 mm). Stainless steel screws. Installation shall be according to the manufacturer’s instructions. Manufacturer: HAGO A-4600 Wels, Austria
www.hago.at