BVE stainless steel

odor- and waterproof

Load capacity:

125 kN test load EN 124.

Material:

Grade 304 stainless steel. Passivated after welding. Also available in grade 316 stainless steel on request (no stock item).

Features:

Accurately manufactured fully sealed access covers. Tapered design allows easy opening. Virtually invisible when installed. EPDM seal.

The Lift-Off opening system:

Every HAGODECK Type BVE stainless steel cover comes with a set of lifting keys and precise installation instructions. The HAGO advantage: jammed covers are released by simply turning the Golden Key.

Applications:

Inside buildings or their surroundings, where exceptionally high standards are needed or where the hygienic properties of stainless steel are preferred, e.g. in the food industry, in meat-processing areas, dairies, hospitals, swimming pools. For indoor swimming pools only use grade 316 material!

Installation:

Installation must be carried out according to our instructions. With water-tight models, care must be taken to seal the outer frame into the surrounding flooring.

Types & Dimensions

Type

Clear dimensions of shaft (≈ cm)Outside dimensions (≈ cm)Weight empty approx.S/O*

c x dA x B

BVE 22

20 x 2033,5 x 33,56 kgS

BVE 33

30 x 3043,5 x 43,59 kgS

BVE 44

40 x 4053,5 x 53,513 kgS

BVE 55

50 x 5063,5 x 63,517 kgS

BVE 64

60 x 4073,5 x 53,516 kgS

BVE 66

60 x 6073,5 x 73,520 kgS

BVE 86

80 x 6093,5 x 73,524 kgS

BVE 88

80 x 8093,5 x 93,530 kgS

BVE 106

100 x 60113,5 x 73,529 kgS

BVE 108

100 x 80113,5 x 93,533 kgS

BVE 110

100 x 100113,5 x 113,540 kgS

Cover depth ≈ 5.0 cm
Installation height ≈ 7.5 cm
Special sizes possible
*S = available from stock
*O = to order

Section drawing

  • 1 / Frame
  • 2 / Cover
  • 3 / Seal
  • 4 / Reinforcement
  • 5 / Allen screw
  • 6 / Plastic cap
  • 7 / Anchor

Specification clauses

HAGODECK Type BVE (stainless steel)
Access cover with Golden Key Lift Off opening tool, Type HAGODECK BVE, clear opening ....... x ....... cm, suitable for infilling with the architect’s choice of floor finish. Grade 304 stainless steel, passivated, sealed, 125 kN (EN 124), unobtrusive corner joints (max. visible surface 35 x 35 mm). Installation shall be according to the manufacturer’s instructions.
Manufacturer: HAGO A-4600 Wels, Austria www.hago.at