BVH-GD maxi steel galvanised BVEH-GD maxi stainless steel

with a deep basin for filling with paving stones - with an opening aid - odor-proof and largely waterproof.

Load capacity:

125 kN test load (EN 124) when filled with a min. 5 cm layer of grade C35/45 concrete (EN 206).

Material:

Frame and cover in 2 mm cold-formed precision steel profiles. Hot-dip galvanised. High-load hinges. High-specification double-piston gas struts.

Features:

Comfort-lift access cover. Cover with 10 cm deep recess. With peripheral EPDM seal, smell proof and largely water-tight (not guaranteed to be completely water-tight). Opening tools included. Opening is assisted by the patented double-piston gas struts to such an extent that the cover can be opened and closed by one person. Safety device fitted to prevent the open cover from closing.

Applications:

For installations which require access without particular effort. Especially for those installations where the cover is to be filled with concrete slabs, bricks, paving stones or paviors etc.

Installation:

Please study the enclosed installation instructions carefully before installation and pay attention to our specifications. Care must be taken to seal the outer frame into the surrounding flooring.
Important note: For transport-related reasons, the gas struts are not installed. These should be installed after the cover and frame have been installed and filled (concrete must be set), in the open position in accordance with our installation instructions.

Types & Dimensions

Type

Clear dimensions of shaft (≈ cm)Outside dimensions without hinge (≈ cm)Weight empty approx.S/O*

c x d A x B

BVH-GDmaxi 66

60 x 6075 x 7552 kgS

BVH-GDmaxi 86

80 x 6095 x 7560 kgO

BVH-GDmaxi 88

80 x 8095 x 9564 kgS

BVH-GDmaxi106

100 x 60115 x 7565 kgO

Cover depth ≈ 10.2 cm
Installation height ≈ 12.5 cm
Special sizes possible
*S = available from stock
*O = to order

Section drawing

  • 1 / Frame
  • 2 / Cover
  • 3 / Seal
  • 4 / Reinforcement
  • 5 / Allen screw
  • 6 / Plastic cap
  • 7 / Hinge
  • 8 / Anchor
  • 9 / Gas strut
  • 10 / Reinforcement

Specification clause

HAGODECK Type BVH-GD maxi (galvanised steel)
Access cover with Golden Key Lift Off opening tool, Type HAGODECK BVH-GD maxi, clear opening ....... x ....... cm, suitable for infilling with the architect’s choice of floor finish. With 10 cm deep recess, with hinges and gas struts for assisted opening, hot-dip galvanised steel, largely sealed, 125 kN (EN 124), with corner joints. Installation shall be according to the manufacturer’s instructions.
Manufacturer: HAGO A-4600 Wels, Austria www.hago.at