BVHS 250/BVHS 400 steel galvanised BVEHS 250/BVEHS 400 stainless steel

Odor- and water-resistant for forklift use or paving stone installation

Load capacity:

250 kN or 400 kN test load (EN 124) when filled with a min. 5 cm concrete.

Material:

Frame and cover made of steel plate, hot-dip galvanised.

Features:

Heavy-duty sealed cover with 10 cm deep recess. Underside of cover reinforced with steel girders. In Type BVHS 400, the frame is reinforced with an additional frame. EPDM seal. Robust steel mesh reinforcement.

The Lift-Off opening system:

Every HAGODECK Type BVHS cover comes with a set of lifting keys and precise installation instructions. The HAGO advantage: jammed covers are released by simply turning the Golden Key.

Applications:

For use in vehicle traffic areas in industrial buildings and areas surrounding buildings or for secondary traffic areas (pedestrian zones). Especially for those installations where the cover is to be filled with concrete slabs, bricks, paviors etc.

Installation:

Installation must be carried out according to our instructions. With water-tight models, care must be taken to seal the outer frame into the surrounding flooring.

Types & Dimensions

Type

Clear dimensions of shaft (≈ cm)Outside dimensions (≈ cm)Weight empty approx.S/O*

c x d A x B

BVHS 250/ 44

40 x 4055,2 x 55,225 kgO

BVHS 250/ 55

50 x 5065,2 x 65,230 kgO

BVHS 250/ 64

60 x 4075,2 x 55,231 kgO

BVHS 250/ 66

60 x 6075,2 x 75,236 kgS

BVHS 250/ 88

80 x 8095,2 x 95,261 kgS

BVHS 250/106

100 x 60115,2 x 75,273 kgO

BVHS 250/110

100 x 100115,2 x115,285 kgO

Cover depth ≈ 10.2 cm
Installation height ≈ 12.5 cm
Steel girders penetrate ≈ 10 cm into the shaft
Special sizes possible
*S = available from stock
*O = to order

Types & Dimensions

Type

Clear dimensions of shaft (≈ cm)Outside dimensions (≈ cm)Weight empty approx.S/O*

c x d A x B

BVHS 400/ 44

40 x 4055,2 x 63,2 49 kgS

BVHS 400/ 55

50 x 5065,2 x 73,260 kgS

BVHS 400/ 64

60 x 4075,2 x 63,257 kgO

BVHS 400/ 66

60 x 6075,2 x 83,269 kgS

BVHS 400/ 86

80 x 6095,2 x 83,295 kgO

BVHS 400/ 88

80 x 8095,2 x 103,2115 kgS

BVHS 400/106

100 x 60115,2 x 83,2113 kgO

BVHS 400/108

100 x 80115,2 x 103,2150 kgO

BVHS 400/110

100 x 100115,2 x 123,2188 kgO

Cover depth ≈ 10.2 cm
Installation heights: up to BVHS 400/ 88 ≈ 23 cm
                                      BVHS 400/110 ≈ 27 cm Special sizes possible
*S = available from stock
*O = to order

Section drawing

  • 1 / Frame
  • 2 / Cover
  • 3 / Seal
  • 4 / Reinforcement
  • 5 / Allen screw
  • 6 / Plastic cap
  • 7 / Reinforcing frame (only with BVHS 400)
  • 8 / Reinforcement

Specification clause

HAGODECK Type BVHS 250 (galvanised steel) Access cover with Golden Key Lift Off opening tool, Type HAGODECK BVHS 250, clear opening ....... x ....... cm, suitable for infilling with the architect’s choice of floor finish. With 10 cm deep recess, hot-dip galvanised steel, sealed, 250 kN (EN 124), with corner joints. Installation shall be according to the manufacturer’s instructions. Manufacturer: HAGO A-4600 Wels, Austria www.hago.at

HAGODECK Type BVHS 400 (galvanised steel) Access cover with Golden Key Lift Off opening tool, Type HAGODECK BVHS 400, clear opening ....... x ....... cm, suitable for infilling with the architect’s choice of floor finish. With 10 cm deep recess, hot-dip galvanised steel, sealed, 400 kN (EN 124), with corner joints. Installation shall be according to the manufacturer’s instructions. Manufacturer: HAGO A-4600 Wels, Austria www.hago.at