BVHS-GD 400 Steel Galvanised BVEHS-GD 400 Stainless Steel

Load Capacity:

400 kN test load (EN 124) when filled with a min. 5 cm layer of grade C35/45 concrete (EN 206).

Material:

Frame and cover in 2 mm cold-formed precision steel profiles. Underside of cover reinforced with steel girder. The frame is reinforced with an additional frame. Hot-dip galvanised. Or grade 304 stainless steel. High-load hinges. High-specification double-piston gas struts. EPDM seal. Robust steel mesh reinforcement.

Features:

Comfort-lift access cover. Cover with 10 cm deep recess. With peripheral EPDM seal, smell proof and largely water-tight (not guaran- teed to be completely water-tight). Opening tools included. Opening is assisted by the patented double-piston gas struts to such an extent that the cover can be opened and closed by one person. Safety device fitted to prevent the open cover from closing. The access cover has a water drain nozzle. There is the option (if required) to connect a drain (pipe or hose). Thereby, water is directly routed out of the frame and the water tightness of the access cover is increased.

Application:

For use in vehicle traffic areas (e.g. fork lift) and areas surrounding buildings or for secondary traffic areas (pedestrian zones). For installations which require access without particular effort. Especially for those installations where the cover is to be filled with concrete slabs, bricks, paving stones or paviors etc.

Installation:

Please study the enclosed installa- tion instructions carefully before installation and pay attention to our specifications. Care must be taken to seal the outer frame into the surrounding flooring.

Important note:

For transport-related reasons, the gas struts are not installed. These should be installed after the cover and frame have been installed and filled (concrete must be set), in the open position in accordance with our installation instructions.

TYPES & DIMENSIONS

STEEL GALVANISED

Type

Clear dimen. of shaft (≈ cm)Outside dimensions (≈ cm)Weight empty approx.S/O*

c x dA x B

BVHS-GD 400/66

60 x 6075,2 x 83,890 kgO

BVHS-GD 400/86

80 x 6095,2 x 83,8115 kgO

BVHS-GD 400/88

80 x 8095,2 x 103,8133 kgS

BVHS-GD 400/106

100 x 60115,2 x 83,8115 kgO

BVHS-GD 400/110

100 x 100115,2 x 123,8197 kgO

STAINLESS STEEL

Type

Clear dimen. of shaft (≈ cm)Outside dimensions (≈ cm)Weight empty approx.S/O*

c x dA x B

BVEHS-GD 400/66

60 x 6075,2 x 83,887 kgO

BVEHS-GD 400/86

80 x 6095,2 x 83,8112 kgO

BVEHS-GD 400/88

80 x 8095,2 x 103,8132 kgO

BVEHS-GD 400/106

100 x 60115,2 x 83,8115 kgO

BVEHS-GD 400/110

100 x 100115,2 x 123,8197 kgO

Installation depth: 10,2 cm
free height: BVHS 400/88 approx. 23 cm
BVHS-GD 400/110 approx. 27 cm
Special sizes possible 
*S = article available from stock
*O = article is manufactured on request

SECTION DRAWING

  • 1 / Frame
  • 2 / Cover
  • 3 / Seal
  • 4 / Reinforcement
  • 5 / Allen screw
  • 6 / Plastic cap
  • 7 / Hinge
  • 8 / Anchor
  • 9 / Gas strut
  • 10 / Reinforcement
  • 11 / Reinforcement (I-Girder)

Specification clause

HAGODECK Type BVHS-GD 400 (galvanized steel)
Fillable manhole cover with Golden Key Lift Off lifting tool, Type HAGODECK BVHS-GD 400, clear opening ....... x ....... cm, available in a variety of finishes. With 10 cm deep basin, with hinges and gas springs for easy opening, hot-dip galvanized steel, largely odor- and watertight, 400 kN (EN 124), to be delivered with corner plates and installed according to the manufacturer’s instructions. Manufacturer: HAGO A-4600 Wels www.hago.at

HAGODECK Type BVEHS-GD 400 (Stainless Steel)
Fillable manhole cover with Golden Key Lift Off lifting tool, Type HAGODECK BVEHS-GD 400, clear opening ....... x ....... cm for selectable surface. With 10 cm deep basin, with hinges and gas springs as opening aids, stainless steel No. 1.4301, largely odor- and watertight, 400 kN (EN 124), deliver with corner plates and install according to the manufacturer’s instructions. Manufacturer: HAGO A-4600 Wels www.hago.at