BVS-400 steel galvanised

For heavy-duty vehicles - odor- and water-resistant

Load capacity:

400 kN test load EN 124 when completely filled with concrete C 35/45 (EN 206).

Material:

Frame and cover made of steel plate, hot-dip galvanised.

Features:

Heavy duty sealed cover. Underside of cover reinforced with steel I-beam section and additional frame. Robust steel mesh reinforcement. EPDM seal. Tapered design allows easy opening.

The Lift-Off opening system:

Every HAGODECK Type BVS-400 steel cover comes with a set of lifting keys and precise installation instructions.
The HAGO advantage: jammed covers are released by simply turning the Golden Key.

Applications:

For vehicle traffic areas in industrial buildings and their surrounding areas, or for secondary traffic areas. Particularly suitable for use in areas where forklifts operate.

Installation:

Installation must be carried out according to our instructions. With water-tight models, care must be taken to seal the outer frame into the surrounding flooring.

Types & Dimensions

Type

Clear dimensions of shaft (≈ cm)Outside dimensions (≈ cm)WeightS/O*

c x dA x B

BVS 400/ 44

40 x 4053,5 x 61,544 kgS

BVS 400/ 55

50 x 5063,5 x 71,552 kgS

BVS 400/ 64

60 x 4073,5 x 61,550 kgS

BVS 400/ 66

60 x 6073,5 x 81,562 kgS

BVS 400/ 86

80 x 6093,5 x 81,588 kgO

BVS 400/ 88

80 x 8093,5 x 101,5103 kgS

BVS 400/106

100 x 60113,5 x 81,5119 kgO

BVS 400/108

100 x 80113,5 x 101,5147 kgO

BVS 400/110

100 x 100113,5 x 121,5175 kgS

Cover depth ≈ 5.0 cm
Installation heights: up to BVS 400/ 88 ≈ 18 cm
                                      BVS 400/110 ≈ 22 cm
Special sizes possible
*S = available from stock
*O = to order

Section drawing

  • 1 / Frame
  • 2 / Cover
  • 3 / Seal
  • 4 / Reinforcement
  • 5 / Allen screw
  • 6 / Plastic cap
  • 7 / Anchor
  • 8 / Frame reinforcement (additional frame)
  • 9 / Reinforcement

Specification clause

HAGODECK Type BVS 400 (galvanised steel)
Access cover with Golden Key Lift Off opening tool, Type HAGODECK BVS 400, clear opening ....... x ....... cm, suitable for infilling with the architect’s choice of floor finish. Hot-dip galvanised steel, sealed, 400 kN (EN 124), unobtrusive corner joints (max. visible surface 35 x 35 mm). Installation shall be according to the manufacturer’s instructions.
Manufacturer: HAGO A-4600 Wels, Austria www.hago.at