BVXHS 250 steel / BVEXHS 250 stainless steel

Reinforced version with extra-high basin – odor-proof and largely waterproof

Load capacity: 

250 kN test load EN 124 at min. 5 cm concrete grade C35/45 (EN 206)

Material: 

Frame and cover made of

BVXHS 250:

Frame and cover made of sheet steel. Hot-dip galvanized. Good chemical resistant special gasket.

BVEXHS 250:

Frame and cover made of stainless steel grade 304 or on request grade 316. After welding full bath pickling. Good chemical resistant special sealing

Features: 

Extra deep recess design. Ideal access cover for truck accessible areas in the building forecourt. In the 150 mm deep recess cover paving stones up to 100 mm in height can be fit. HAGODECK types BVXHS 250 and BVEXHS 250 convince by high load capacity and stable construction. Thanks to EPDM seal the cover is odor-proof and largely watertight.

Lifting Plates:

The lift-out plates are fitted with 2 slot holes (for common lifting tools, not included in delivery) and a thread for the HAGOlifter (lifting device).

Applications:

As truck accessible access cover in warehouses and building forecourt areas. For paving stones up to 100 mm high, concrete blocks etc.

Installation:

Installation must be carried out according to our instructions. With water-tight models, care must be taken to seal the outer frame into the surrounding flooring.

Types & Dimensions

Type

Clear dimensions of shaft (≈ cm)Outside dimensions (≈ cm)Weight empty approx.S/O*

Galvanized steel

c x dA x B

BVXHS 250 66

60 x 6075,2 x 75,272 kgO

BVXHS 250 88

80 x 8095,2 x 95,2101 kgO

BVXHS 250 110

100 x 100115,2 x 115,2140 kgO

Stainless steel

BVEXHS 250 66

60 x 6075,2 x 75,272 kgO

BVEXHS 250 88

80 x 8095,2 x 95,2101 kgO

BVEXHS 250 110

100 x 100115,2 x 115,2140 kgO

Special sizes possible
Special cover depth possible

*S = available from stock
*O = to order

Section drawing

  • 1 / Frame
  • 2 / Cover
  • 3 / Seal
  • 4 / Reinforcement
  • 5 / Anchor
  • 6 / Lifting plate
  • 7 / Reinforcement

Specification clause

HAGODECK Type BVXHS 250 (galvanised steel)
Access cover, type HAGODECK BVXHS 250, clear opening ....... x ....... cm, suitable for infilling with the architect’s choice of floor finish, extra deep pan with 15 cm deep recess, hot-dip galvanised steel, sealed, 250 kN (EN 124).

The lift-out plates are fitted with 2 slot holes (for common lifting tools, not included in delivery) and a thread for the HAGOlifter (lifting device).
Installation shall be according to the manufacturer’s instructions.
Manufacturer: HAGO A-4600 Wels, Austria www.hago.at

HAGODECK Type BVEXHS 250 (stainless steel)
Access cover, type HAGODECK BVEXHS 250, clear opening ....... x ....... cm, suitable for infilling with the architect’s choice of floor finish, extra deep pan with 15 cm deep recess, stainless steel, passivated, sealed, 250 kN (EN 124).

The lift-out plates are fitted with 2 slot holes (for common lifting tools, not included in delivery) and a thread for the HAGOlifter (lifting device).
Installation shall be according to the manufacturer’s instructions.
Manufacturer: HAGO A-4600 Wels, Austria www.hago.at