CCA composite comfort Alu

with a hinge, odor-proof, and largely waterproof

Load capacity:

Class A (15kN test load) EN 124

Materials:

Frame in extruded aluminium. Cover in extruded aluminium bonded to a composite aluminium honeycomb panel (with a white coating). Stainless steel screw connections. EPDM seal

Features:

modern lightweight-construction access cover. Major weight-savings compared to concrete-filled access covers. The cover is lifted by the hinge, significantly reducing the effort required. A safety device is fitted, locking the cover in the raised position. As the cover is not filled with concrete, installation is quicker and simpler. There is a recess of 24mm for laying slabs, tiles, parquet etc. In the case of thin tiles, the difference in height can be compensated for by using a suitable tile adhesive (MAPEI Keralastic) and waterproof building board. Sealed design with a very high-quality finish. Very attractive surface, particularly the visible edges. Inconspicuous corner joints make it easy to connect tiles, slabs etc.

Opening with the Lift-Off System with the help of the hinge:

Every HAGODECK Type CCA composite comfort aluminium comes with a set of lifting keys and detailed installation instructions. The HAGO advantage: Jammed covers are released by simply turning the Golden Key.

Recommended applications:

As a cover inside buildings which can be opened by one person.

Installation:

Installation should be carried out according to our installation instructions. In the case of water tight covers, care must be taken to seal the outer frame into the surrounding floor. Attach slabs or tiles fully (over the whole surface) with a suitable tile adhesive (e.g. Mapei Ultrabond Eco PU 2K oder Ardex 8+9). In the case of thin tiles or slabs, use waterproof building board to compensate for the difference in height. 

Types & Dimensions

Type

Clear dimensions of shaft (approx. cm)Outside dimensions (approx. cm)Weight without floor finishS/O*

c x d A x B

CCA 55

50 x 5062 x 6410 kgS

CCA 64

60 x 4072 x 5410 kgS

CCA 66

60 x 6072 x 7412 kgS

CCA 77

70 x 7082 x 8414 kgS

CCA 86

80 x 6092 x 7414 kgS

CCA 88

80 x 8092 x 9417 kgS

CCA 106

100 x 60112 x 7417 kgS

Cover depth approx. 6.6 cm, installation height approx. 7.6 cm
Special sizes possible
*S= available from stock 
*O= to order

Section drawing

  • 1 / Frame

  • 2 / Cover

  • 3 / Seal

  • 4 / Allen screw (stainless steel)

  • 5 / Die-cast corner (alu)

  • 6 / Plastic cap

  • 7 / Aluminium-honeycomb plate (with white coating)
  • 8 / Injection-moulded part (plastic)

  • 9 / Square nut (stainless steel)

  • 10 / Hinge

  • 11 / Safety device

Specification clause

Aluminium composite lightweight construction access cover with honeycomb core Type HAGODECK CCA, with hinge, clear opening ..... x ..... cm, leaving a recess of 24mm suitable for site finishing with the architects choice of floor finish, sealed, largely water tight, with Golden Key Lift-Off opening tools, 15 kN (EN 124). Installation to be carried out according to the manufacturer’s instructions. Producer: HAGO 4600 Wels, Austria. www.hago.at