CLA composite light Aluminium

odor- and waterproof

Load capacity:

Class A (15kN test load) EN 124

Materials:

Frame in extruded aluminium. Cover in extruded aluminium bonded to a composite aluminium honeycomb panel (with a white coating). Stainless steel screw connections. EPDM sealing

Features:

Modern lightweight-construction access cover. Major weight-savings compared to concrete-filled access covers. Opening the light cover couldn’t be easier. As the cover is not filled with concrete, installation is quicker and simpler. There is a recess of 24mm for laying slabs, tiles, parquet etc. In the case of thin tiles, the difference in height can be compensated for by using a suitable tile adhesive (MAPEI Keralastic) and waterproof building board. Sealed design with a very high-quality finish. Very attractive surface, particularly the visible edges. Inconspicuous corner joints make it easy to connect tiles, slabs etc.

Opening with the Lift-Off System:

As a cover inside buildings (pedestrian traffic only), which can be opened by 1-2 persons (depending on the size of the cover) without great effort. Installation: Installation has to be carried out according to our installation instructions. In the case of water tight covers, care must be taken to seal the outer frame into the surrounding floor. Attach slabs or tiles fully (over the whole surface) with a suitable tile adhesive (MAPEI Keralastic). In the case of thin tiles or slabs, use waterproof building board to compensate for the difference in height.

Every HAGODECK Type CLA composite light aluminium comes with a set of lifting keys and detailed installation instructions. The HAGO advantage: Jammed covers are released by simply turning the Golden Key.

Recommended applications:

As a cover inside buildings (pedestrian traffic only), which can be opened by 1-2 persons (depending on the size of the cover) without great effort.

Installation:

Installation has to be carried out according to our installation instructions. In the case of water tight covers, care must be taken to seal the outer frame into the surrounding floor. Attach slabs or tiles fully (over the whole surface) with a suitable tile adhesive (e.g. Mapei Ultrabond Eco PU 2K oder Ardex 8+9). In the case of thin tiles or slabs, use waterproof building board to compensate for the difference in height.

Types & Dimensions

Type

Clear dimensions of shaft (approx. cm)Outside dimensions (approx. cm)Weight without floor finishS/O*

c x d A x B

CLA 22

20 x 2032 x 323 kgS

CLA 33

30 x 3042 x 425 kgS

CLA 44

40 x 4052 x 527 kgS

CLA 55

50 x 5062 x 629 kgS

CLA 64

60 x 4072 x 529 kgS

CLA 66

60 x 6072 x 7210 kgS

CLA 86

80 x 6092 x 7212 kgS

CLA 88

80 x 8092 x 9215 kgS

CLA 106

100 x 60112 x 7215 kgS

CLA 108

100 x 80112 x 9220 kgO

CLA 110

100 x 100112 x 11225 kgO

Cover depth approx. 6,6 cm, installation height approx. 7,6 cm
Special sizes possible
*S= available from stock
*O= to order

Section drawing

  • 1 / Frame
  • 2 / Cover
  • 3 / Seal
  • 4 / Allen screw (stainless steel)
  • 5 / Plastic cap
  • 6 / Aluminium-honeycomb plate (with white coating)
  • 7 / Injection-moulded part (plastic)
  • 8 / Square boss (stainless steel)
  • 9 / Die-cast corner (aluminium)

Specification clause

Aluminium composite access cover, lightweight construction with honeycomb core, Type HAGODECK CLA, clear opening ..... x ..... cm, leaving a recess of 24mm suitable for site finishing with the architects choice of floor finish, sealed, with Golden Key Lift-Off opening tools, 15 kN (EN 124). Installation to be carried out according to the manufacturer’s instructions. Producer: HAGO 4600 Wels, Austria. www.hago.at