CRVA Aluminium

with hinge, with gasket

Load capacity:

15 kN test load EN 124

Material:

Frame made of aluminium extruded sections. Cover made of 3/5 mm aluminum chequerplate. Aluminium reinforcement to the underside. Stainless steel screw and EPDM seal.

Features:

Comfort cover and completely rust-proof. A special seal with good chemical resistance ensures an odor-proof and largely watertight (complete water tightness not guaranteed) solution. Opening tools included. Thanks to the hinge and the low weight of the aluminium plate, the cover can be easily handled by one person without any special efforts. A safety device is fitted, locking the cover in the raised position.

Applications:

For covers which are opened more frequently and have to be easy to handle. Particularly for inspection and revision covers where corrosion resistance and low weight are a substantial advantage.

Installation:

Installation must be carried out according to our instructions. With water-tight models, care must be taken to seal the outer frame into the surrounding flooring.

TYPES & DIMENSIONS

Type

Clear dimensions of shaft (approx. cm)Outside dimensions (approx. cm)Weight approx.S/O*

c x d A x B

CRVA 66

60 x 6068,5 x 71,110 kgS

CRVA 86

80 x 6088,5 x 71,112 kgO

CRVA 88

80 x 8088,5 x 91,115 kgS

CRVA 106

100 x 60108,5 x 71,114 kgO

CRVA 108

100 x 80108,5 x 91,117 kgO

CRVA 110

100 x 100108,5 x 111,121 kgO

Installation height ≈ 7 cm

Special sizes possible

*S = available from stock

*O = to order

SECTION DRAWING

  • 1 / Frame
  • 2 / Plate cover
  • 3 / Seal
  • 4 / Allen screw (stainless steel)
  • 5 / Socket
  • 6 / Plastic cap
  • 7 / Hinge
  • 8 / Injection-moulded part (plastic)
  • 9 / Square nut (stainless steel)
  • 10 / Safety device

SPECIFICATION CLAUSE

HAGODECK Type CRVA (aluminium)
Access cover with chequerplate with Golden Key Lift Off opening tool, with flush-to-floor hinge and safety hold open arm
Type HAGODECK CRVA, clear opening ....... x ....... cm. Aluminium, sealed, stainless steel screws. 15 kN (EN 124). Installation shall be according to the manufacturer’s instructions. Manufacturer: HAGO A-4600 Wels, Austria www.hago.at