RVS 125/250/400 steel galvanised / RVES 125/250/400 stainless steel

Reinforced version – odor-proof and waterproof

Load capacity:

125 kN, 250 kN or 400 kN test load according to EN 124

Material:

RVS:
Frame made of hot-dip galvanized steel. Durbar-plate cover 6 mm (125 kN and 250 kN) or 8 mm (400 kN) and reinforced underside. Good chemical resistance special seal.

RVES:

Frame, Durbar-plate and reinforcement made of stainless steel grade (SS 304) on request also available in grade (SS 316). Good chemical resistant special seal

Features:

RVS or RVES in heavy-duty design:

Durbar-plate cover with high load-bearing capacity.

The ideal solution for secondary traffic areas with car or truck traffic and factory halls. Due to the EPDM seal, the cover is largely odor and waterproof. Installation instructions and removal key are included.

Application:

For use in vehicle traffic areas in industrial buildings and secondary traffic solutions.

Installation:

Installation must be carried out according to our instructions. With water-tight models, care must be taken to seal the outer frame into the surrounding flooring.

Types & Dimensions

Type

Clear dimensions of shaft (≈ cm)Outside dimensions (≈ cm)Weight approx.S/O*

Galvanised steel

cxdAxB

RVS 125/ 66

60 x 6072 x 7243 kgO

RVS 125/ 88

80 x 8092 x 9270 kgO

RVS 125/ 110

100 x 100112 x 112106 kgO

Stainless steel

RVES 125/ 66

60 x 6072 x 7243 kgO

RVES 125/ 88

80 x 8092 x 9270 kgO

RVES 125/ 110

100 x 100112 x 112106 kgO

Special sizes possible

Type

Clear dimensions of shaft (≈ cm)Outside dimensions (≈ cm)Weight approx.S/O*

Galvanised steel

cxdAxB

RVS 250/ 66

60 x 6072 x 7249 kgO

RVS 250/ 88

80 x 8092 x 9278 kgO

RVS 250/ 110

100 x 100112 x 112124 kgO

Stainless steel

RVES 250/ 66

60 x 6072 x 7249 kgO

RVES 250/ 88

80 x 8092 x 9278 kgO

RVES 250/ 110

100 x 100112 x 112124 kgO

Special sizes possible

Type

Clear dimensions of shaft (≈ cm)Outside dimensions (≈ cm)Weight approx.S/O*

Galvanised steel

cxdAxB

RVS 400/ 66

60 x 6072 x 7268 kgO

RVS 400/ 88

80 x 8092 x 92107 kgO

RVS 400/ 110

100 x 100112 x 112155 kgO

Stainless steel

RVES 400/ 66

60 x 6072 x 7268 kgO

RVES 400/ 88

80 x 8092 x 92107 kgO

RVES 400/ 110

100 x 100112 x 112155 kgO

Special sizes possible

Section drawing

  • 1 / Frame
  • 2 / Durbar-plate cover
  • 3 / Seal
  • 4 / Allen screw
  • 5 / Plastic cap
  • 6 / Socket
  • 7 / Anchor
  • 8 / Reinforcement

RVS 250

RVS 400

Specification clause

HAGODECK Type RVS 125 (steel galvanised) Durbar-plate access cover with Golden Key Lift Off opening tool, Type HAGODECK RVS 125 , clear opening ....... x ....... cm. Steel galvanised, sealed, 125 kN (EN 124).
Installation shall be according to the manufacturer’s instructions.
Manufacturer: HAGO A-4600 Wels, Austria www.hago.at

HAGODECK Type RVS 250 (steel galvanised) Durbar-plate access cover with Golden Key Lift Off opening tool, Type HAGODECK RVS 250 , clear opening ....... x ....... cm. Steel galvanised, sealed, 250 kN (EN 124).
Installation shall be according to the manufacturer’s instructions.
Manufacturer: HAGO A-4600 Wels, Austria www.hago.at

HAGODECK Type RVS 400 (steel galvanised) Durbar-plate access cover with Golden Key Lift Off opening tool, Type HAGODECK RVS 400 , clear opening ....... x ....... cm. Steel galvanised, sealed, 400 kN (EN 124).
Installation shall be according to the manufacturer’s instructions.
Manufacturer: HAGO A-4600 Wels, Austria www.hago.at

HAGODECK Type RVES 125 (stainless steel) Durbar-plate access cover with Golden Key Lift Off opening tool, Type HAGODECK RVES 125 , clear opening ....... x ....... cm. Grade 304 stainless steel, sealed, 125 kN (EN 124).
Installation shall be according to the manufacturer’s instructions.
Manufacturer: HAGO A-4600 Wels, Austria www.hago.at

HAGODECK Type RVES 250 (stainless steel)Durbar-plate access cover with Golden Key Lift Off opening tool, Type HAGODECK RVES 250 , clear opening ....... x ....... cm.
Grade 304 stainless steel, sealed, 250 kN (EN 124).
Installation shall be according to the manufacturer’s instructions.
Manufacturer: HAGO A-4600 Wels, Austria www.hago.at

HAGODECK Type RVES 400 (stainless steel)Durbar-plate access cover with Golden Key Lift Off opening tool, Type HAGODECK RVES 400 , clear opening ....... x ....... cm. Grade 304 stainless steel, sealed, 400 kN (EN 124).
Installation shall be according to the manufacturer’s instructions.
Manufacturer: HAGO A-4600 Wels, Austria www.hago.at